Premium XPS Low Profile Kit - 10m2

SKU: XPS 10M2

Premium (Renol1te) - 25mm 350kPa high quality XPS (Extruded polystyrene).

Uses 16mm pipe at 150mm spacing. Produces approximately (80-100W/m²) output.

Not to be confused with any EPS and/or other insulation type systems.

Controls (14)

Additional control options, for other model stats or 12v networked stats view our controls section for a full list or contact us.

Honeywell 10 Way Junction Box + £9.22
Honeywell 10 way junction box, allows thermostat to be wired in a single zone system.
Heatmiser 8 Zone Wiring Centre + £58.59
Designed to work with any 230v room thermostat.
Danfoss 8 Zone Wiring Centre + £72.99
Allows up to 8 thermostats to control the UFH system.
Standard Dial Thermostat + £10.00
Underfloor heating 240 volt room thermostat with dial control temperature range 5oC - 30oC.
TopLo - UFH1PRT + £27.00
7 day programmable room thermostat with digital display and blue background.
TopLo - UFH1PRT-TS (White) + £32.00
7 day Touch screen programmable room thermostat with digital display and blue background.
Toplo - WiFi app enabled Thermostat (Wired 230v) + £39.50
Ice White. No Hub required
UFH1PRTTSi (White) + £49.00
iPod Style - 7 day Touch screen programmable room thermostat with digital display and blue background.
UFH1PRTTSi (Black) + £49.00
iPod Style - 7 day Touch screen programmable room thermostat with digital display and blue background.
TopLo - UFH1PRT-TS (Black) + £32.00
7 day Touch screen programmable room thermostat with digital display and blue background.
Danfoss Actuator + £12.40
230v, 2 wire electrothermic actuator used for individual zone/circuit control, normally when using multiple thermostats. Allow one per circuit.
Thermostat Sensor Box + £7.50
Empty Room Sensor Enclosure. Dimensions 80Wx 80H x 22D mm
Thermostat Sensor Lead - One Free Per Thermostat (If selected) FREE
One free with each thermostat purchased. This probe is supplied with a 3 meter cable and can be used to measure air and floor temperature.
Standard Zone Valve + £45.00
2 Port motorised zone valve. Two valves are often used for 'zoning off' an underfloor heating system from a radiator circuit. We can advise on this and supply a wiring diagram with the kit if requested.

£479.99 (+ VAT)

Need help?

Send us your floor plans and we will create you a free no-obligation specification & quote.

Send Plans

Product Details

Kits Includes

SKU	XPS 10M2
PRMSS02	1x Premium 2 Port St/Steel Manifold/iso valves/fill & drain
EURO16	4x Manifold eurocone pipe connector/fitting 16mm x 2mm
TOPEFPP	1x Toplo A rated pump/mixing valve pack
PIPE	100m Toplo 16mm PE-X al PE-X MLCP Pipe
XPS	18x RENOL1TE XPS 'overfloor' board 1200mm x 600mm x 25mm
MANUAL	1x UFH Installation Manual
XPSM	1x RENOL1TE XPS Installation Manual

Reasons to choose XPS Floor Heating System:

The boards are insulation, therefore will insulate pipe from the floor below.
A panel thickness of just 25mm made from high density, strong XPS (compressive strength of 350KPa), far superior in performance to EPS.
Energy-saving low temperature system.
Low weight - Ideal for renovation of old buildings and installing on existing flooring.
Unique 25mm system that uses 16mm pipe at 150mm spacing.
Rapid response time – comparable to radiator heat up times.
Can be used over any floor construction.
Can be used with any floor covering (tiles require ply or dry screed board on the XPS).
Suitable for boilers, heat pumps etc.

Please note for clarity not all the parts supplied with this kit are shown in photo.

Have a question?

Fill if the form below and a member of our team will get back to you as soon as possible.

Premium XPS Low Profile Kit - 10m2

SKU: XPS 10M2

Controls (14)

Need help?

Product Details

Kits Includes

Reasons to choose XPS Floor Heating System:

Have a question?

UFH1

CUSTOMER SERVICE

SOCIAL MEDIA

Subscribe

REGISTERED OFFICE