Cement Coated XPS Low Profile Underfloor Hetaing Kits

SKU: RENOCEM

A 150mm centred pre-routed, cement-coated XPS panel, designed for use with water-based underfloor heating systems.

These panels are ideal for installation on solid floors, such as concrete, screed, and asphalt floors, as well as suspended timber floors that have been boarded with suitable floor boarding, such as tongue-and-groove planking or chipboard planking.

Read Full Details

We close for Christmas 23rd December at 4pm and reopen on Thursday 2nd January 2025.
Any orders placed during this period will be sent on our return – with delivery ETA Friday 3rd January 2025.

Size (11)

Select your kit size.

£0.00 (+ VAT)

Need help?

Send us your floor plans and we will create you a free no-obligation specification & quote.

Send Plans

Product Details

The panels are easy to cut and install and should be laid with the panel joints staggered in a brick bond style. The routed channels are compatible with most flexible low-pressure underfloor heating pipes. The panels are designed for use over existing floors, providing a low-height build-up and insulated floor.

These overlay panels are made from high-density XPS (300 kPa), which is thermally insulating, lightweight, waterproof, and faced with a reinforced cement coating. The panels offer a quick and easy solution for the placement of pipework in both domestic and commercial underfloor heating applications. The lightweight, reinforced cement facing provides a robust surface that is ideal for direct bonding of tiles. Many other types of finish, such as engineered wood, carpet, vinyl, etc. can also be used with additional preparation of the panels.

SUITABLE FOR
The Cement Board is suitable for both new construction and retrofit installations. In most situations, no additional board is needed, and flooring can be laid directly on the upper surface. Wood flooring should be installed using a suitable underlay as per the manufacturer's instructions. Flooring-grade tiles can be applied using a suitable combed tile adhesive layer.

For other types of finishes, a separating layer of Construction Board may be needed before proceeding with the installation.

INSTALLATION
These Cement Boards allow for quick installation over a flat, level subfloor. They can also be applied over various other substrates, provided they are fully supported and, where necessary, used in conjunction with a damp-proof membrane (DPM).

  • TIMBER BASE
    When installing on timber surfaces, the panels should always be secured with mechanical fixings and washers. The fixings must be of an appropriate length for the specific application.

  • CONCRETE BASE
    For installations directly onto concrete, the boards should be adhered using a layer of combed tile adhesive (S1 or equivalent). In some cases, mechanical fixings may also be required depending on the substrate.

FINISHING
In most situations, no additional board is needed, and flooring can be laid directly on the upper surface.

Wood flooring should be installed using a suitable underlay as per the manufacturer's instructions. Flooring-grade tiles can be applied using a suitable combed tile adhesive layer.

For other types of finishes, a separating layer of Construction Board may be needed before proceeding with the installation.

Have a question?

Fill if the form below and a member of our team will get back to you as soon as possible.

If you are seeing this message, you have CSS turned off. Please leave the below field blank.
* Denotes mandatory fields
   Read our Privacy Policy
Free CAD
Service
Full Installation
Service
Industry Leading
Warranty
Best UK
Trade Rates
We Will Beat
Any Quote